FAQs

Its a target for dry shooting, Accurize target is built on a heavy duty plastic frame to provide years of trouble free laser shooting action. With a short flash laser bullet  you can hit the target ,and get the result of the hit directly to your tablet or phone via Bluetooth technology, instantly.

Accurize shooting system is for indoor use under normal light conditions. Avoid direct sunlight on target.

Integrated battery offers you hours of shooting action.

The targets are scaled to the correct size according to original targets and are optimally used at 5 m or 10 m distance. This gives you the same feeling as when shooting at real targets for gun, rifle, pistol etc.

Excellent for dry shooting practice with different firearms.

User manual

User manual

The Accurize target system is easy to install and simple to use. Just follow the instructions in the user manual , which you will find on our webpage

User manual

https://www.youtube.com/watch?v=iUdfCgSe-28&t=202s

No cables or computers are needed. Use your mobilphone or your tablet to monitor hits and results with Bluetooth. Use your own firearm, add your laser ammo, and in a few minutes you can enjoy a trouble free shooting.

Dimensions: 270 x 210 x 28mm.

Weight: 800g

Accurize works optimally between 5m and up to 15m shooting distance. The normal is 5m or 10m distance.

The targets are scaled for use on 5m or 10m and are identical to real target.

There are different exchangeable targets which are available to use. It is animal motif, pistol targets, DFS standard targets, ISSF , biathlon,long range   eg. They can be purchased through your distributor / dealer. These are made of special plastic with the right color resolution so that the laser penetrates and can be read.

The Accurize Works best with class 1 red 650nm laser

Operating Temp. range:-25 to +35 C
Storage Temp. range: -25 to + 55 C

CE – RoHS – FCC

One Year Limited Warranty.

Accurize laser cartridge should be used as it is specially designed for the shooting system.

Cw output poser (Po) : < 1mW
Wavelength at peak emission: 645-665nm

If the target doesn’t register a hit within 30 minutes, it will automatically turn off. To start shooting again you need to restart the target.

Turn the switch to on position and the red lamp will light up.

You can easily change the target type by sliding the target plates into the slot on the top of the target. Choose the type depending of the shooting distance and your level of shooting.

Battery working time: 8 hour (1050 mA , power consumption: 50mA)
Battery Charging time: 10 hour (100mA)
Battery Life: 5 Year

The Accurize shooting system can also be used while charging.

Bluetooth: Class 1 ( 20-30m)

1. Use the tripod to mount the Accurize target on.
2. Simple installation or permanent installation on a wall.

Use wooden screws with a small head that fits into the slots on the backside of the target.

Download the user guide from www.accurizetarget.com and select your language. 

Accurize App Manual EN 2.1.1

Ensure Accurize target is on and fully charged.

Press the on/off button on the simulator screen down in the right corner. Open the app.

Go to Settings , up in the right corner three dots ->connect to target->No Target Selected, hit scan and select target address that appears on screen. The app will now connect and return to the main screen once connected and target address is display under Target.

Click the start session on the screen and you’re ready to start the shooting session.

On the settings screen select “Reconnect On App Start” to 1.

This assumes that it is the same smartphone / tablet used as last time.

If multiple users of the Accurize shooting system , please do not use this feature, the target will start searching for the last connected device.

You can have as many users as you want on the Accurize shooting system, each with its own profile and history.

Each user need to registrate and log in with their own profile.

Users are different people with their own firearm.
To add a new user see the user manual.

There are a number of possible settings that can be adjusted according to the use of the app.

At the top right of each page there is a small question mark, click on this and help texts appear and show what each character means.

Go to> settings> targets> Click +  in the upper right to create a new target motif or click directly on the target you want to change settings on.

This page appears

and you can then change settings

• Number of shots in the session
• blocking for shots
• sound
• set disc motif
• select tripod or Moving slider rail course/speed

see pictures with help text

If you are connected to an Accurize target the “Start Session” button will become visible. Touch “Start Session” and when “waiting…” appears on screen start shooting. Your shots will be displayed in the target and scores displayed at the bottom of the screen.

Each session is the number of shots you have defined and once all  have been fired ,the app stores the session so it can be viewed from the history screen.

Most rifle scopes are delivered today with fixed Paralaxe adjustment (normally adjusted to approximately 100m shooting distance).

Such scopes will be challenging to work optimally with Accurize.

The challenge is the distance to the target unit, and you will easily perceive the problem if you put the weapon on a table and aim at the target assembly.

Moving the eye’s position will cause the reticle to move on the target, even though the firearm is quite calm. You will simply get a visual error due to the Paralax problem.

If you choose to use a regular scope, you should use the lowest possible magnification – as well as be aware that the position of the eye is as much as possible the same on each shot. You can use Accurize as a good training tool, but precision shooting on the smallest targets- and short distance will be challenging / difficult.

Accurize, however, works supremely if you use scopes with manual paralaxis adjustment, red-eye view, diopter or open sight.

Accurize has also developed its own scope for short-range shooting, contact your dealer.

It is also possible to solve the precision problem by mounting on an Accurize paralaxe cup, which is available from your dealer.

Its important to keep the magazine in the rifle using the cal .22lr laser.This is especially important on the rifle Izhmash.

If the magazine is out of the rifle, the sound from the trigger pin will go down into the magazine compartment and then become too weak for the laser in the muzzle.

In the app, it is possible to do an automatic firearm / sight calibration so that the system sets a center point for each firearm. This means that you do not have to adjust your sights.

Need to be done before each session if the laser cartridge have been reloaded.

See operating instructions for further instructions or this film. Automatic sight adjustment

You can also do a manual calibration of your firearm and move the centerpoint mm pr mm. Just follow the user manual or see this film Manual calibration

You can use holding ahead of the animal by choosing direction of that function in the app settings.

You may also adjust for the speed of the animal so its the same as the moving slider rail speed.

You can now tap the arrow to change the direction of the animal .

You can now set the speed for how far ahead the animal you need to aim. Tap %.

This feature can be set from 1 – 10
seconds and you then define how long
the target should be blocked from receiving
shots. This is especially  for
those using our cal.22lr laser, or the acoustic modified version, where
they find that a new laser shot is
emitted at a charge grip after the fixed
1.5 second time build into the cartridge. Using
the blocking/inhibit feature allows you to take
charge grips for up to 10 seconds after
extraction without laser shot being
detected at charge grip.

How to move fast in the menu, look here

Move fast in the menu

This may be due to several things.

• Incorrect lighting conditions, change lighting conditions
• Batteries on the laser cartridge need replacing
• The end cap of the laser cartridge needs replacing. Required after about 6000 shots.
• Is the App connected to the target?

• Low battery on the simultator screen or the phone/tablet

Accurize app uses Bluetooth Low Energy (BLE) to connect with Accurize targets. Your device must support BLE for the Accurize app to work. Your device should also have the latest operating software installed to ensure full compatibility.

• Most mid to high end Android™ devices support BLE running Android™ 9 and above.
• iPhone™ 6 onwards support BLE.
• iPad™ 5th generation onwards support BLE.
• All iPad™ mini support BLE.Android™ and Apple™ versions of the app function identically once installed.

The Accurize App will only connect to nearby Accurize targets.

• Accurize target must be in range of device with Accurize App installed to connect.
• Accurize target must be turned on with enough battery to connect.
• Only one Accurize target can be connected to at any time.
• Only one device can be connected to an Accurize Target.
• Try restarting Accurize App, Accurize target and device if issues connecting are experienced.
• Other devices using similar frequencies to Accurize targets may effect connection range.
• Most scopes are delivered today with fixed Parallax adjustment (normally adjusted to approximately 100m shooting distance). Such scopes will be challenging to work optimally with Accurize.

The challenge is the distance to the target unit, and you will easily perceive the problem if you put the weapon on a table and aim at the target assembly.

Moving the eye’s position will cause the reticle to move on the target even though the weapon is quite calm. If you choose to use a regular scope, you should use the lowest possible magnification.

You can use Accurize as a good exercise tool, but precision shooting on a small target- and short distance will be challenging / difficult. Your distributor, will sell a very affordable scope, which works well with the Accurize target .

Accurize works optimally if you use scopes with manual paralysis adjusment, red-eye view, diopter or open sight.